Thermo labels provide a fantastic solution to the problem of identifying cables because they are extremely versatile and have a number of qualities that can be useful over time. For example, they are abrasion and fade resistant, meaning that the lettering will not wear off or fade over time. In twenty years or so you will be able to read the label exactly as if it were printed that day. The heat will not affect them either. In fact, thermo labels are not affected by oil, solvents, UV light, dirt or water. As such, they are perhaps the best solution for cables in the home or business premises.

There are several ways to administer thermo labels to the cables. Depending on your cable identification labeling needs, you can either purchase a thermo label printer and create your own labels or you can purchase the labels on rolls and then apply them to the individual cables as you choose. Some of the individual labels will shrink to fit the cables after they have been applied when the cables get hot but others will have to be applied with a heat gun. You should check this out before you actually purchase the labels.

A thermo labels heat printer is often more economical than buying the labels individually, especially if you are labelling all of the cables for the first time. You can print one label and then change the lettering if you so wish, which gives you more of a choice. You can also buy print cartridges when you need them so you can use it again and again. Obviously these are more widely used by electricians rather than in domestic settings by homeowners, but thermo labels can be used all over the home.

Some thermo labels printers are designed to print directly onto the cables by using a unique printing technology. This is commonly used on smaller and more awkward wires but the labels are often better for larger cables because you can easily wrap them around with little effort.

There are many cable and wire identification systems out there and they tend to be widely used today. They are not to be confused with marking systems because they actually serve to label the wires. Identification systems, on the other hand, actually identify wires that are no longer in use in the home. That is to say that they are de-energized. This can happen for a number of reasons and may actually be a source of weakness in any circuit.

Identification systems are used to identify the de-energized cables from the energized cables to make any working on the wiring in a home or in a business much easier and much safer. By being equipped to tell which wires are in use and which are not, the level of safety for someone handling wires is dramatically increased. This may be why they are used in both installation and maintenance. Any electrician that is installing new wiring must fully test that wiring when he or she is finished and identification systems provide a quick and easy way of doing so. If the wiring is not tested then it can cause a major hazard in future. During maintenance, every worker must check whether cables are in use before touching them or could end up seriously hurt or worse.

Identification systems are easy to use both in technique and in operation. Of course, operation and technique varies from model to model, of which there are many on the market. However, the majority of identifications take just second to use and give accurate results. Before using any system, you should always read the instructions to be on the safe side because some check for live wires instead of de-energized ones. It is much better to be safe than sorry!

A good wire and cable marking system can help you to decipher what cables and wires lead where at a glance. This in itself is extremely useful because it has a number of functions, for both the homeowner or business staff and also any electricians that may be called in to solve any problems at a later date.

For the person operating any electrical equipment at home or at work, it is the external cabling that matters. A good wire and cable marking system can identify the wires that lead to a TV, PC, printer, telephone and anything else you may have in the one place. This can prevent confusion if one of the above is not working or needs to be unplugged for another reason. It saves the hassle of pulling out the wrong plug and risking an electric shock!

For the electrician, a wire and cable marking system can enhance the safety of the work environment and enable him or her to solve any problems much more quickly and efficiently. A wire and cable marking system effectively ensures that all wires are labelled to ensure that the electrician can follow the circuit and identify where exactly the problem lies.

Implementing a wire and cable marking system can be extremely tie consuming if one is implemented after the initial wiring to the building is already done, which is why you should ensure it is done from the start if possible. However, taking the time to do it at any stage of its lifespan could save you time and money at a later date.

Many companies offer a wire and cable marking system product so, depending on the system that you want to implement, you can choose the one that best suits your wants and needs. Any system is better than none though so look into the possibility today!

Until then, you can download our PDF Catalogue, or alternatively, please contact us and we can help you with your enquiry.

Kind Regards

The Grafoplast Team.

EGO1PRO is the innovative thermal transfer Hand-held printer designed for use on site, including industrial applications With EGO1PRO, a wide range of self-adhesive, high quality labels can be printed in different sizes and styles.

It features a back-lit display with 14 characters per line, a built-in industrial cutter and a protective case. The EGO1PRO also has rapid access keys, allowing direct access to the separate component marking functions (wrap, fixed, patch panels, module or vertical) and the most common electric and data symbols.

EGO1PRO uses a tape with a width of 6, 9, 12 and 19 mm available in a wide range of materials (Vinyl, Polyester, Heat shrinking, Not adhesive and Nylon).

With EGO1PRO it is possible to generate two types of bar codes: CODE-39 and CODE-128, and save up to eight labels in memory.

Its measurements (without the protection case) are:Length 70 mm. Height 212 mm. Width. 114 mm. Weight 519 grams; it has a function that enables the power-off after 5 minutes of inactivity.

EGO1PRO is able to print multiple copies of the same label, a serialised run of numbered labels (with alphanumeric increments) printing up to 99 copies of the same label.

If you need any further information about any of our products please contact us.

• Regularly updated news and updates.
• Monthly product focus, across our range of products
• More in depth information about all our products
• Download our latest Catalogue in PDF Format.

Please take a look around our web-site. Please check back soon, for further updates.